The 4-Site™ F3P is an attractive, easy-to-assemble, flat foam model that offers incredible precision and aerobatic flight characteristics. Constructed primarily of 3mm Depron foam, the 4-Site also offers a high level of prefabrication, including pre-beveled parts, pre-hinged control surfaces and a highly visible, pre-printed trim scheme. The lightweight, laser-cut Depron foam construction, carbon fiber support rods, and carbon fiber motor mount set the standard for quality, durability and performance. The 4-Site also includes two different sets of speed brakes for optimal personalized flying styles. For anyone looking for an extremely lightweight, indoor foamie that excels in precision aerobatic flight and is easy to assemble, the 4-Site flies over the competition.
Features
- Genuine laser-cut 3mm Depron foam construction for strength, stiffness and quality with minimum weight
- Low parts count and high level of prefabrication
- Extremely lightweight
- Designed for E-flite's Park 250 brushless outrunner motor
- Two different sets of speed brakes included
- Molded landing skids included
- Vibrant factory finished trim scheme
- Carbon and foam bracing
In Depth
- Wingspan: 32 in (823mm)
- Overall Length: 37 in (940mm)
- Wing Area: 397 sq in (25.5 sq dm)
- Flying Weight: 6–6.5 oz (179–184 g) with battery
- Motor Size: E-flite Park 250 BL outrunner motor, 2200Kv
- Prop Size: 8x4 Direct Drive prop
- Speed Control : E-flite 10-amp brushless ESC
- Recommended Battery: 2S 7.4V 350mAh Li-Po
- Scale: Indoor F3P/Aerobatic Flyer
- Approx. Assembly Time: 4–5 hours
Required
-
6-channel transmitter (for proper mixing and dual rate capabilities)
Micro receiver
3 sub-micro servos
Motor
10A brushless ESC
8x4 Direct Drive prop
Battery and charger