The Mini Pulse XT is another aircraft in E-flite’s outstanding line of electric RC aircraft and accessories. E-flite uses top-quality engineering and materials in everything they make, so you always get the maximum level of value and fun. E-flite also backs all of its products with the best customer service and support in the hobby so your electric flight experience is always a positive one.
Features
- 95% factory-built; get flying in 3 hours or less
- Lightweight balsa and lightweight plywood construction
- Firewall accepts E-Flite Park 450 Brushless Outrunner without modifications
- Factory-installed hinges and control horns
- Bolt-on wing and tail
- Factory-painted aluminum landing gear with fiberglass wheel pants
- Steerable tail wheel
- Factory-painted cowl
- Easy-access magnetic battery hatch
- Covered in genuine UltraCote
- Design based on Hangar 9's popular Pulse 40 XT
In Depth
- Wingspan: 42.5 in (1080mm)
- Overall Length: 37.5 in (875mm)
- Wing Area: 330 sq in (21.3 sq dm)
- Flying Weight: 25-27 oz (795-965g)
- Motor Size: Park 450 BL Outrunner, 890Kv
- Radio: 4 channels
- Servos: 4 sub-micros
- Trim Scheme Colors: UltraCote White (#870), Deep Blue (#873), and Orange (#877)
- CG (center of gravity): 2-3/4 in (70mm) behind the leading edge
- Prop Size: 10x8 Electric
- Hardware Included: Yes
- Speed Control : 30A Pro SB Brushless
- Recommended Battery: 2100 mAh 3-cell 11.1V Li-Po
- Control Throw (Ailerons): 3/8 in (9mm) Low Rate or 1/2 in (13mm) High Rate
- Control Throw (Elevator): 1/4 in (6mm) Low Rate or 1/2 in (13mm) High Rate
- Control Throw (Rudder): 1-1/4 in (32mm) Low Rate or 1-1/2 in (38mm) High Rate
- Scale: Park Flyer
- Approx. Assembly Time: 3 hours
Required
-
E-flite Park 450 BL Outrunner Motor
E-flite S75 Sub-Micro Servos (4)
E-flite 30A Pro Switch-mode BEC Brushless ESC
4-channel or greater Radio
6-channel micro receiver
11.1V 3-Cell 2100mAh Li-Po Battery
