Based on the popular Hangar 9 Pulse XT 40, the E-flite Mini Pulse XT PNP is perfect for anyone moving up from a trainer or intermediate to expert pilots looking for a no-fuss parkflyer. Its friendly flight characteristics won’t overwhelm the newer pilot, but it’s still agile enough for a wide range of basic aerobatics. And it can be flying in no time because it comes out of the box with the motor, ESC and servos installed. All that needs to be added is the transmitter, receiver, battery pack and charger of choice. Even the control linkages are installed.
Satisfy your flying fix with the E-flite Mini Pulse XT PNP. It has all the features which make for a convenient flight experience. An easy-access magnetic battery hatch stays firmly in place yet makes swapping out batteries quick and easy. The steerable tail wheel is built into the rudder so takeoffs and rollouts on breezy days are more controllable. Two hex screws hold the wing firmly in place making it easy to remove for transport. The bolt-on tail is secured with two heavy-duty lock nuts. The tough aluminum landing gear comes already painted along with a factory-painted fiberglass cowl and wheel pants. This exclusive Plug-N-Play configuration lets you get airborne in less than an hour.
Features
- Plug-N-Play® design—just add battery pack, transmitter, receiver and charger
- Lightweight balsa/lightweight plywood construction
- Covered in genuine Hangar 9® UltraCote®
- A 450-size brushless motor at 890Kv that comes factory-installed to provide excellent sport power and save pilots time
- 22-Amp Brushless ESC installed
- Four factory-installed 9-gram sub-micro servos
- Factory-installed hinges and control horns
- Factory-painted aluminum landing gear and fiberglass wheel pants
- Steerable tail wheel
- Bolt-on wing and tail
- Easy-access magnetic battery hatch
- Design based on Hangar 9’s popular Pulse™ 40 XT
In Depth
- Wingspan: 42.5 in (1080mm)
- Overall Length: 37.5 in (875mm)
- Wing Area: 330 sq in (21.5 sq dm)
- Flying Weight: 25 - 27 oz (795-965 g)
- Motor Size: Installed 450 BL Outrunner, 890Kv (special PNP motor)
- Radio: 4 channels or greater
- Servos: 9 gram (4 installed)
- Trim Scheme Colors: UltraCote White (#870), Deep Blue (#873), and Orange (#877)
- CG (center of gravity): 2 3/4 in (70mm) behind the leading edge of the wing
- Prop Size: 10x7 Slow Flyer (included) or 10x8 Electric recommended upgrade)
- Spinner Size: 1 3/4 in (included)
- Hardware Included: yes
- Speed Control : 22A Brushless (installed)
- Recommended Battery: 2100mAh 11.1V Li-Po
- Control Throw (Ailerons): 3/8" (9mm) Low or 1/2" (13mm) High Up/Down
- Control Throw (Elevator): 1/4" (6mm) Low or 1/2" (13mm) High Up/Down
- Control Throw (Rudder): 1-1/4" (32mm) Low or 1-1/2" (38mm) High Left/Right
- Scale: park flyer
- Approx. Assembly Time: 1 - 2 hours
Required
-
2100mAh 3-cell 11.1V Li-Po
1-3 Cell Li-Po Charger
4+Channel Transmitter
4+ Channel Micro Receiver
