E-flite’s latest Park 370 is a brushless outrunner motor that features a 4mm hollow shaft, ideal for use with variable pitch propellers. It’s perfectly designed for electric models equipped with variable-pitch propeller systems, such as the E-flite® ShowStopper VPP system. However, you don’t need a VPP to use this motor—it’s an excellent motor for small 3D airplanes that weigh 7–14 ounces. A motor mount, prop adapter and all hardware are included.
Features
- Ideal for models requiring up to 120 watts of power
- Optimized windings for 3D performance
- High-torque, direct-drive alternative to inrunner brushless motors
- Includes mount, prop adapters and mounting hardware
- 4mm hollow shaft is easily reversed for alternative motor installations
- Excellent motor for small 3D airplanes 7–14 oz (200–400 g)
- Extremely lightweight—just 1.6 ounces
- Ideal for variable pitch props such as the E-flite® Showstopper Variable Pitch Prop System
- External rotor design for better cooling
- High-quality construction with ball bearings
In Depth
- Type: Brushless outrunner
- Size: Park 370
- Bearings or Bushings: One 4 x 8 x 4mm Bearing, and One 4 x 9 x 4mm Bearing
- Recommended Prop Range: 8x3.8–10x4.7 or Variable Pitch systems
- Voltage: 7.2–12V
- RPM/Volt (Kv): 1200
- Resistance (Ri): .18 ohms
- Idle Current (Io): .60A
- Continuous Current: 10A
- Maximum Burst Current: 12A (15 sec)
- Cells: 6–10 Ni-MH/Ni-Cd or 2–3S Li-Po
- Speed Control: 12–20A Brushless
- Weight: 45 g (1.6 oz)
- Overall Diameter: 28mm (1.10 in)
- Shaft Diameter: 4mm (.16 in) hollow
- Overall Length: 25mm (1.00 in)
Required
-
12–20A brushless ESC
2–3S Li-Po or 6–10 Ni-Cd/Ni-MH
8x3.8–10x4.7 Slow Flyer Prop
Variable Pitch Prop option