Propeller Adapt Nut,8 x 1mm,Short

These steel prop adapter nuts include prop washers and are also CNC machined to offer the best possible quality. They are available in different crankshaft threads to fit many engines on the market.

To avoid the problem of long screws, which tend to flex and break at the point where they enter the adapter nut, we make 4 lengths of adapter nuts: Short, Long, X-Long and XX- Long. This allows for the use of shorter screws, which don’t flex and break.

Although it will depend on the thickness of your prop and the spinner size, as a general rule, always use the longest adapter nut possible.

Use SHORT adapters with spinners 2 1/2” and under.
Use LONG adapters with 2 3/4” to 3” spinners.
Use X-LONG adapters with 3 1/4” to 4" spinners.
Use XX-LONG adapters with spinners 4 1/2" and up.
Use a LOCK NUT with an adapter nut on 4-stroke engines.
If you are using a LOCK NUT, you need an adapter one size shorter.
If you are selecting an adapter nut for an ULTIMATE spinner, which is over 2 3/4" in Dia, pick an adapter one length longer. If the Ultimate spinner is larger than 3 1/2 in Dia, use an XXL adapter.

This product is covered by our limited warranty policy. We stand behind our products and all items are guaranteed to be in working order and fully functional. Any items found to be defective upon arrival will be repaired or replaced free of charge within 60 days of purchase.

Returns or exchanges of new and unused products will also be accepted up to 60 days after the date of purchase.